Solar PV mounting system is the skeleton supporting the components of the PV power station. It can fix the photovoltaic modules on the roof, ground, water and other application scenarios of photovoltaic power stations, and can make the photovoltaic power station run stably for 25 years. During the operation of photovoltaic power plants, in order to maximize the efficiency and life of photovoltaic power generation, it is also very important to perform daily inspection and maintenance of Solar PV mounting system. The following are some detailed steps about the daily inspection and maintenance of Solar PV mounting system:
Ⅰ. Precautions for daily inspection of Solar PV mounting system :
Installation inspection : Regularly check whether the bolts, welds and connections of the photovoltaic support are sealed and secure. When the system is unstable, such as twisted, deformed or damaged, it is necessary to repair or replace parts in time.
Anti-corrosion inspection : PV supports are usually made of aluminum alloy, stainless steel, carbon steel and other materials, and the anti-corrosion performance of these materials is very important. If there is rust, paint peeling and oxidation on the surface of the photovoltaic support, it needs to be treated in time and preservatives should be applied.
Cleaning inspection : Dust, leaves, branches and other debris will accumulate on the surface of the photovoltaic support, which will lead to a decrease in the efficiency of the photovoltaic panel. Therefore, the surface of the bracket needs to be cleaned regularly to ensure that its surface is neat and clean. For photovoltaic brackets with rotatable angles, it is also necessary to check whether they can rotate freely and apply an appropriate amount of antirust agent.
Ⅱ. Precautions for daily maintenance of Solar PV mounting system :
Keep dry : It is also very important to keep the PV modules and supports dry. If there is water, it needs to be cleaned in time, otherwise it may affect the power generation efficiency or cause damage to the components. At the same time, the drainage system on the Solar PV mounting system should be kept unimpeded and dredged regularly.
Maintenance of the bottom foundation : In addition to the maintenance of the photovoltaic support itself, attention should also be paid to the maintenance of the surrounding infrastructure. This includes operations such as mowing grass and spraying pesticides to ensure that the environment around the Solar PV mounting system is clean and tidy, and to avoid damage to the infrastructure by plant roots.
Remote monitoring : The remote monitoring system can monitor in real time, so that faults can be found and repaired in time. This technology can regularly check the health of photovoltaic modules and Solar mounting system, identify problems and provide repair suggestions, helping to increase the operating efficiency and reliability of the system.
Daily inspection and maintenance of Solar PV mounting system parts : ensure the stability of the sealing strip, no degumming, no cracking, and no blistering; the hidden frame glass should be inspected regularly, and when replacing, it needs to be replaced as a whole with components that have expired after the curing period; The closure needs to be flexible, and lubricated with lubricating oil regularly to ensure that the bolts and screws do not loosen.
IPv6 network supported 
